Is it necessary and how to properly wash the Askona mattress cover?

Askona mattress covers are high-quality covers that protect your sleeping area from wear, loss of shape and dirt.

Like any other bedding, these products tend to get dirty. There are several ways to deal with stains, from machine washing to dry cleaning.

How to wash the Askona mattress cover? You can find out which method is suitable for a specific mattress cover model from the article.

Can it be processed in a washing machine?

Eat mattress covers Ascona, which can be washed in a machine. These include:

1. Thin textile covers.
2. Waterproof products.
3. Mattress covers filled with polyester fibers, latex and holofiber.

It is forbidden to subject to manual and automatic washing:

• rigid orthopedic structures,
• products with carbon impregnation,
• with coconut coir.

They do not tolerate contact with water. They are cleaned dry, for example, using a vacuum cleaner.

In order not to damage the product, you need to carefully study the label. On it, in the form of icons, the rules for caring for a specific mattress cover are encrypted. Read more about washing mattress covers Here.

Features of caring for mattress covers from this manufacturer

Depending on the material from which the mattress cover is made, the rules for caring for it differ.

With polyester fibers

The mattress cover filled with polyester fibers is machine washable. This product is not picky in care, so it does not require compliance with any strict rules.

Basic recommendations:

• wash in water up to 60 degrees;
• spin at speeds up to 600 rpm;
• refusal of aggressive detergents;
• dry on a flat surface.

If the cover is orthopedic, contains other fillers in addition to polyester fibers and has a rigid frame, it cannot be washed by hand or in a machine. For such products only dry cleaning is suitable.

With coconut filling

Mattress cover with coconut coir characterized by increased rigidity, allows you to make the sleeping place not only comfortable, but also correct from an anatomical point of view.

However, the manufacturer foresaw possible difficulties with cleaning and provided the mattress cover with a removable knitted cover. It closes with a zipper. It can be washed both in a machine and by hand.

Basic Rules:

1. Do not exceed the water temperature of 60 degrees.
2. Do not squeeze the product at high speeds, so as not to provoke its shrinkage.
3. Do not dry on a radiator or in the sun.

It is not difficult to take care of the “filling” of the mattress cover. It is enough to ventilate the product 1-2 times a month and vacuum it with each change of bed linen.

Latex and holofiber

A product made of natural latex filler and a knitted cover allows you to give elasticity to the mattress, make the sleeping area soft and comfortable, and eliminate unevenness.

The manufacturer recommends regularly ventilating it in a room with dry and cool air.. If this is not possible, then it is taken out onto the balcony or onto the street.

This procedure must be performed at least once a month. To get rid of stubborn stains, you can use a washing machine.

Procedure:

• load the product into the drum;
• set the “delicate wash” program;
• set the water temperature to 40 degrees;
• spin is turned off;
• After completing the cycle, allow the water to drain, lay the cover on a flat surface and wait until it is completely dry.

Care for a holofiber mattress cover in the same way. If necessary, the washing temperature is increased to 60 degrees. You can use the automatic spin function at 400 rpm.

The mattress cover is protected from direct sunlight. They may cause damage to the product.

Waterproof

It is recommended to wash the waterproof mattress cover by hand in cool water, or in a machine on a delicate cycle.

Rules to follow:

1. Do not exceed the temperature of 30 degrees.
2. Do not turn on the spin function or twist the product by hand.
3. Use liquid detergents that do not contain chlorine or other bleaching ingredients for washing.

For minor contamination, local treatment of the product with a sponge and soap solution is sufficient. Waterproof covers should not be dried near heat sources or in the sun. They are not allowed to be ironed.

Drying rules

Drying a mattress cover is no less important than washing it. To prevent the product from becoming deformed, the following rules must be observed:

• do not squeeze or twist the fabric;
• dry the covers on a horizontal surface;
• To prevent water from running faster than glass and not dripping onto the floor, you can place a terry towel under the mattress cover;
• Do not hang the product in the sun or on heating devices.

The thicker the mattress pad, the longer it will take to dry. Optimal drying conditions are natural conditions.

How to get rid of stains?

Sometimes a single stain appears on a clean mattress cover. Spots can have different origins (wine, cosmetics, blood, fat, food).

To get rid of them, it is not necessary to wash the entire bedding. It is enough to treat the contaminated area with one of the following compounds:

1. Vinegar 9% and soda. Sprinkle baking soda on the stain, and soak a sponge in vinegar, using which you gently blot the stain. When the reaction is complete, remove any remaining cleaning agent with a damp cloth.
2. Soap solution. The soap is grated and completely dissolved in water. A sponge is soaked in it and used to wipe the stain.

   If it is old, then the solution is left for 10-30 minutes, after which it is carefully cleaned with a soft brush. Then the foam is removed with a clean damp cloth.

3. Hydrogen peroxide. Apply it to a cotton pad and wipe the stain with it until it disappears completely. Then treat the case with a soft, damp cloth.

It is not recommended to use a hard brush when cleaning the mattress cover. Excessive friction can damage the fabric.

Important Tips

Tips that may come in handy owners of the Askona mattress cover:

1. Do not use aggressive detergents for washing.
2. Use a vacuum cleaner to remove dust and small particles of debris.
3. Air the mattress cover 1-2 times a month.
4. When loading the cover into the drum of the washing machine, you need to take into account that its weight increases by 2-3 times after getting wet.

Conclusion

The Askona mattress cover will last a long time if you care for it properly. Machine wash of soft covers should be gentle, without spinning and at low temperature.

Rigid products designed to perform an orthopedic function can only be cleaned dry.